Installation instructions: F-15E Superpit version 2.2,  released Nov 2004

 

F-15E Strike Eagle Superpit in Falcon 4.0 with FF5 only:
  F-15E Strike Eagle Superpit in Falcon 4.0 with FF5:
Step 1  Run the F15E_installer, and point F4patch to the FFviper.exe
Step 2  Select FF3 and apply.
Step 3 Copy the content (except 3dckpt.dat)of Falcon4\art\ckptart\864 to Falcon4\art\ckptart\F-15E
Step 4 Download the update to v2.4 here
Step 5 Unzip the update into Falcon4\art\ckptart\F-15E
Step 6 Run Falcon and select an F-15E to fly

 

Functionality description

F-15E splashscreens 

 

Cockpit in 1600 x 1200 resolution.

This version is intended for a variant of SP3/SP4/FF2/BMS/FF3 and beyond. So that means you have properly installed Falcon 4.0,
patched with one of the above prior to installing the superpit. Note that only the BMS/FF3 installs allow autoscaling, therefor it is possible to fly in lower resolutions. The other variants are for 1600x1200 res only.

  F-15E pit installation
Step 1  Run the F15E_installer, and point F4patch to the correct .exe
Step 2  Select the variant of your installation and apply
Step 3 Run Falcon and select a F-15E to fly

 
  F-15E nightpit installation
Step 1  Run the Superpits.exe on your desktop and point F4patch to the correct .exe
Step 2  Select the nightpit and apply

 

F-15E Strike Eagle Superpit in Falcon 4.0 with Red Viper only:
  F-15E Strike Eagle Superpit in Falcon 4.0 with Red Viper:
Step 1  Run the F15E_installer, and point F4patch to the RedViper.exe
Step 2  Select FF3 and apply.
Step 3 Copy the content of Falcon4\art\ckptart\864 to Falcon4\art\ckptart\F-15E
Step 4 Download the update to v2.4 here
Step 5 Unzip the update into Falcon4\art\ckptart\F-15E
Step 6 Run Falcon and select an F-15E to fly

 
  F-15E nightpit installation
Step 1  Run the Superpits.exe on your desktop and point F4patch to the RedViper.exe
Step 2  Select the F-15E nightpit and apply.
Step 3 Make a Falcon4\art\ckptartn\F-15E dir
Step 4 Copy the content of Falcon4\art\ckptart\864 to Falcon4\art\ckptartn\F-15E
Step 5 Unzip the F-15E_RV_updatev2.4.zip update into Falcon4\art\ckptartn\F-15E
Step 6 Run Falcon and select an F-15E to fly

 

Functionality description

F-15E splashscreens 

 

F-15E Eagle Superpit features: features:
Features:
FCP and RCP:
- There is a  FCP and RCP (front cockpit and rear cockpit), switching is done via Shift-2 or Shift-1 and panning up/down.
- Flying in the backseat only can be fun if Autopilot is set to combat mode.
A/A grid
- The RCP has an A/A attack grid in the left MPD, click on the left MPD screen to activate
MPD color
- The real F-15E MPD's are in green only, so it is advised to disable "color MFD's" in the config editor in your main Falcon4 dir.
Kneeboards
- Kneeboards, the right knee has the excellent checklists by Red Dog. The left knee in the RCP has the Pusan airbase landing and departure charts, also by Red Dog. Browsing is done by left and rightclicking them, the only downside of these browsable charts is that they actually are the comms volume switches, so browsing them may influence your comms volume.
Moving map
- The FCP has a moving map in the center MPCD, it can be enabled by pushing the TSD button
ADI/RWR/HSI
-The left MPCD in the RCP has a digital ADI and a RWR function, the right MPCD a HSI function
Nightlighting
- Flying at night, there are 2 options, one is enabling the instruments lights on the right panel
- The second option is enabling the nightpit for backlit panels. Enabling the nightpit is done by launching the "Superpits" icon on your desktop and selecting it. 
-Rampstart
- A full rampstart is possible, checklists on your desktop in PDF format and on the right knee in game

Credits for this add-on:
- Homercide for the excellent !  installers and all his help in general.
- My wife and kids for allowing me to invest time in the project
Aeyes, cockpits.nl